How to maintain Santak UPS uninterruptible power supply?When you start using the power supply, you should first choose a good location for installation. Good installation location requires ventilation and drying, and not close to water sources and corrosive objects. The temperature of the environment should be kept moderate. If the temperature is too high or too low, the use of intelligent power will be adversely affected. In addition, the intelligent power supply should be placed in a stable place, and the intake and outlet holes should be maintained in a smooth situation, which is conducive to prolonging the service life of Shante UPS power supply.
When using smart power for the first time, the product should be charged for at least 12 hours, so as to make the smart power fully charged, avoid the situation that the actual capacity is lower than the nominal capacity, and fail to give full play to the role of smart power. It is better not to idle the intelligent power supply for a long time. If the intelligent power supply is not used for a long time, it should be guaranteed to run 24 hours on time in the unused time, so that the intelligent power supply is fully charged, and it should run for 2-3 minutes in the working state of the inverters, otherwise the quality of the products will be affected.
When using it, we should also pay attention to its turn-on and turn-off sequence, otherwise it will cause damage to the smart power supply. In the operation, we should first supply power to Shanterups, then turn on the load to avoid the damage caused by the current shock when the load starts, and turn off the load before turning off the UPS power supply when the power is off.