<noframes id="9rddn"><listing id="9rddn"><meter id="9rddn"></meter></listing>

<thead id="9rddn"><form id="9rddn"></form></thead>

    <video id="9rddn"><cite id="9rddn"><meter id="9rddn"></meter></cite></video>

      <span id="9rddn"></span>

      Welcome~Shenzhen Santak UPS power supply Co., Ltd.
      Language: 中文版 ∷  英文版

      Company news

      Usage Method and Switching Sequence of Shante UPS Uninterruptible Power Supply

      Put the three-hole plug in the fuselage of Shante UPS power supply into the socket of municipal power supply, open the UPS power switch, let the UPS power supply work normally, then insert the power cord plug of computer host and display into the socket behind the fuselage of UPS power supply, and turn on the machine one by one.
      The usage of Shante UPS power supply is as follows:
      First boot-up
      Close in the following order: energy storage battery switch automatic bypass switch output switch is placed in "ON" in turn.
      Press the "on" button of UPS startup panel, the UPS power supply system will start slowly, and the "inverted" indicator light will be on. After a delay of 1 minute, the "bypass" lamp will be off, and the UPS will be converted to the inverted power supply to complete the start-up.
      After no-load operation for about 10 minutes, the load is started according to the starting sequence of load power from large to small.
      2. Daily start-up
      Just press the "on" button on the UPS panel, and in about 20 minutes, you can turn on the computer or other instruments.
      Usually when UPS starts to work stably, the power switch of load equipment can be turned on.
      Three, shutdown
      First turn off the computer or other instruments and let UPS run for 10 minutes without load. After the heat is discharged from the standby machine, press the "close" button on the panel.
      UPS is an uninterruptible power supply. It connects the storage battery (mostly lead-acid maintenance-free battery) with the host computer, and converts DC power into commercial power through module circuits such as host inverter. Mainly used to provide a stable and uninterrupted power supply for a single computer, computer network system or other power electronic devices such as solenoid valves, pressure transmitters, etc. UPS devices usually provide protection against high or low voltage. DC power supply is a device to maintain a steady current in the circuit. Such as dry batteries, storage batteries, DC generators, etc.
      永久不卡免费视频在线观看